Alba tooling & engineering in Forstau, Austria
Contact Service
Menu
Produktfinder Product-finder
Language
Downloads Downloads Search
Close search

Search Alba Website:

Search
Close Search

Alba - Productfinder

Choose category:

Technologies
Products
1. Choose category...
2. Choose technology...
3. Choose technology...
1. Choose product...
2. Choose product...
3D-Silikon-membrane

Membrane laminating at Alba

Membrane laminating

In order to activate the adhesive system between the décor material and the supporting part, it must be heated to a defined bond line temperature. Subsequently, the adhesive in the joint should be cooled to a certain temperature in order to solidify it again and thus complete the activation process.

Adhesive activation must not only be carried out under certain temperature conditions, but also under the influence of pressure. The compressive force should be effective on the entire decorative surface to avoid unevenness and pressure points. For this we use a 2D silicone film or 3D silicone membrane, which can be placed precisely over the laminating part and it is pressed evenly by means of vacuum.

Alba as a specialist for innovative membrane laminating systems

Video membrane laminating system

Alba as a specialist for innovative membrane laminating systems Alba as a specialist for innovative membrane laminating systems

Contact

Stephan Boehr
Managing Director Germany
E-Mail: office-mmb@albatools.com
Phone: +49 172 8552038

 

To the top

Desprition of the following image:.

Head

Titel of the previous image

Titel of the next image

You are in this document

You are on a subpage to this link

To open the menu click here

Video